Things to do as a Homeowner Maintenance of Your Water Heater
As a homeowner, it is very important to have a good water supply to your house. The number of uses that the water has is high. The water’s temperature is of importance. If the weather is not hot, then cold water is ideal. During the cold season, however, it is vital that you have warm water. Because of this, you must have a water heater. Considering that most people with water heaters use it all the time, it is what that consumes a lot of energy in the house. The thing that is required for longevity when using a water heater is using regularly doing some maintenance. There are many ways that you can be able to do this. In this article we take a look at some of the best water heater maintenance heaters that you can use as a homeowner.
First and foremost you must flush the tank regularly or after a period of one year. Flushing the water tank is very important. There will be no sediment build-up in the water heater if it is flushed. If the sediment build-up increases, it will be harder for the water heater to heat the water. This will cause the energy bill to increase.
Secondly the water heater should have some insulation on it. Doing this is what will extend the water heater’s life. One good insulating material that you should make use of is called insulating foam. This way the heat that is generated will be contained. The end result is that you will have a more efficient water heater. If it is possible you should also insulate the pipes that connect to the water heater.
The other thing that you should is to clean the air filter as well. Ideally the water should not contain any kind of debris. The only time that debris can get in the tank is if the air filter is not working okay. The water heater will therefore be easily damaged from the inside by the debris. Cleaning an air filter is best done by hand.
You should also know more about the state of the anode rods that are usually in the tank. If there are anode rods in the tank then the tank will no rust. Take the anode rods out of the tank if you check and see that they are way too rusted. Here if you do not replace the anode rods, you will get that the water heater has rusted. One last thing to check is the TPR valve.